Exhaust Manifold - Removal

REMOVAL





1. Disconnect the battery negative cables.
2. Drain the coolant Service and Repair.
3. Raise vehicle on hoist.
4. Remove the EGR cooler EGR Cooler - Removal.
5. Remove the air filter housing Air Cleaner Body - Removal.
6. Remove the air filter inlet hose from the turbo inlet.
7. Remove the delta-P line bracket capscrew nuts and remove the delta-P line from the exhaust manifold and thermostat housing.
8. Remove the heat shield and noise panel (if equipped) from the exhaust manifold.
9. Remove the turbocharger Turbocharger - Removal.
10. Remove the two (2) rear exhaust manifold capscrew lock plates.
11. Remove the Cab Heater tubing/bracket from the exhaust manifold stud.
12. Remove the exhaust manifold.