Front

PICK UP

Special Tools:









Figure 1 - Frame Mounts
1. Disconnect both negative battery cables.
2. Remove the viscous fan/drive assembly Viscous Radiator Fan Clutch - Removal
3. Install Engine Support Fixture tool.
4. Loosen the right side and left side thru-bolt and nut (1).
5. Lift the engine SLIGHTLY and remove the thru-bolt and nut (1).




Figure 2 - RH Engine Mount
6. Remove bolts (1) and the RH mount (2) from engine.




Figure 3 - LH Engine Mount

NOTE: 4x4 engine mount shown 4x2 similar.

7. Remove bolts (1) and the LH mount (2) from engine.