Turbocharger System Lines - Installation

INSTALLATION





1. Clean turbocharger drain tube (2) mounting surfaces.
2. Install new O-rings on turbocharger drain tube (2). Lubricate with clean engine oil.
3. Install turbocharger drain tube (2) into cylinder block.
4. Install new gasket and turbocharger drain tube (2) mounting bolts at turbocharger (1).
5. Tighten bolts to 24 Nm (18 ft. lbs.).
6. Install RH engine mount Engine Mount Insulator - Installation.
7. Start engine and check for leaks.