Diesel Exhaust Fluid Engine Coolant Control Valve - Installation

INSTALLATION





1. Install the coolant control valve assembly (2). Tighten bolt (1) to 54 Nm (40 ft. lbs.).





2. Position and connect the DEF coolant lines (5) into routing clip (6).
3. Connect the coolant supply (1) and return lines (2) to DEF tank.





4. Connect the coolant control valve harness connector (1).





5. Install the DEF tank (2) into place. Tighten bolts (1) to 108 Nm (80 ft. lbs.).
6. Remove the transmission jack.





7. Clip coolant lines bracket (3) to frame rail and install push pin (4).
8. Connect the coolant hoses (1 and 2) going to DEF tank.
9. Fill the cooling system Service and Repair.
10. Connect both negative battery cables.