Front Brake Hose

FRONT BRAKE HOSE










1. Install the hose (3).
2. Install the mounting bolt (1) for the brake hose (3) at the frame (Figure 1).
3. Install the brake hose banjo bolt at the caliper.
4. Reinstall the wheel speed sensor wire (2) to the brake hose.
5. Remove the support and lower the vehicle.
6. Remove the prop rod from the brake pedal.
7. Bleed the area of repair for the brake system, If a proper pedal is not felt during bleeding an area of repair then a base bleed system must be performed.Service and Repair.