Rear

INSTALLATION






NOTE: It is not necessary to remove the rear seat assembly in order to remove the seat cushion foam and cover.

1. Install the seat cushion frame and install the seat cushion frame bolts. Rear Seat - Description
2. Tighten the seat cushion frame bolts to 55 Nm (41 ft. lbs.)
3. Position the cover (3) on to the foam (1) and install three new hog rings (2).
4. Position the foam and cover assembly over the seat cushion frame.





5. Install the seat cushion foam/cover (1) over the seat cushion frame and secure the J-straps (2).
6. Connect the seat cushion heat mat electrical connector, if equipped.