Rear

DISASSEMBLY

Special Tools:










1. Remove the seat back. Seat Back - Removal
2. Press master and slave buttons on head restraint guides simultaneously and remove the headrests.





3. Separate the J-straps (2).





4. Separate the J-strap (1).
5. Remove the two rear hog rings (2).





6. Remove the two bolts (3).
7. Remove the two nuts (4).
8. Pull the bottom of the armrest out and away from the seat back.
9. Release the two top hooks (2) and remove the armrest.
10. Separate the remaining J-straps (1 and 5).





11. Using pliers or equivalent, squeeze the locking tabs and remove the headrest sleeves.





12. Remove the foam and cover assembly.
13. Remove the hog rings (2) attaching the cover (3) to the foam (1).

Center Arm Rest





1. Remove the pivot bolts (2) and separate the armrest (1) from the tray (3).





2. Using trim stick or equivalent, disengage the clips (1) and remove the cup holder (2).





3. Unzip the cover (1) and separate the foam and cover (2) from the armrest frame.