Winch Motor - Removal

REMOVAL





1. Remove the winch assembly (2). Winch - Removal





2. Separate one of the roller shaft clips (1), remove the shaft (3) and the roller (4).





3. Remove the bolts (3) and separate the support bracket (1) from the winch assembly (2).





4. Remove the relay pack (1). Winch Relay Pack - Removal





5. Stand winch assembly on the clutch end with the motor up to make it easier to align the motor coupler and drive shaft.
6. Remove the two motor mounting bolts (1) and carefully lift the motor (2) off of the drum assembly.