Water Pump - Removal

6.7L DIESEL ENGINE










1. Disconnect battery negative cables.
2. Drain cooling system Service and Repair.
3. Disconnect ambient air temp sensor electrical connector and mass airflow sensor electrical connector (if equipped).
4. Remove turbocharger inlet tube and air filter housing. For 5.9L Diesel, Air Cleaner Body - Removal , for 6.7L Diesel, Air Cleaner Body - Removal.
5. Remove generator assembly Generator - Removal.
6. Remove the accessory drive belt Serpentine Accessory Drive Belt - Removal.
7. Remove water pump mounting bolts (1).
8. Remove O-ring from water pump (2).
9. Remove water pump (2). Clean water pump sealing surface on cylinder block.