Headliner - Removal

REMOVAL

Standard Cab





CAUTION: Hands should be clean or clean cloth gloves used when handling the headliner to avoid damage to the headliner.

1. Remove the A-pillar trim A-Pillar Trim Panel - Removal.
2. Remove the upper B-pillar trim B-Pillar Trim Panel - Removal.
3. Remove the screws and remove the visor supports.
4. Remove the screws (2) and remove the visors (1). Disconnect the electrical connectors, if equipped.





5. Using a small flat bladed tool, open the coat hook screw cover (2) and remove the screws and coat hooks.





6. Disconnect the CHMSL wiring electrical connector.





7. Remove the instrument panel side trim covers and disconnect the electrical connectors (1).
8. Separate the support push pin fasteners (2).





9. Disconnect the A-pillar wiring and clips (3).
10. Remove the headliner.

Quad/Crew/Mega Cab





CAUTION: Hands should be clean or clean cloth gloves used when handling the headliner to avoid damage to the headliner.

1. Remove the windshield. Windshield - Removal
2. Remove the upper B-pillar trim B-Pillar Trim Panel - Removal.
3. Remove the upper C-pillar trim, if equipped. C-Pillar Trim Panel - Removal





4. Disconnect the CHMSL wiring electrical connector.





5. Remove the instrument panel side trim covers and disconnect the electrical connectors (1).
6. Separate the support push pin fasteners (2).





7. Disconnect the A-pillar wiring and clips (3).
8. Disengage the sunroof trim ring if equipped.





9. Remove the DVD monitor screws (2) and separate the monitor (1) from the roof, if equipped.





10. Disconnect the DVD housing electrical connectors (1), if equipped.
11. Remove the overhead console. Front Overhead Console - Removal




12. Disconnect the sunroof module electrical connector (1) from the sunroof module takeout, if equipped.





13. Disconnect the electrical connector (1) from the body harness at the C-pillar left hand side.
14. Remove the body harness clip from the C-pillar inner left hand side, if equipped.
15. Disconnect the main harness from the body harness at the C-pillar inner right hand side.





16. Remove the headliner through the windshield opening.
17. Remove the visor outboard retainer from the body.
18. Remove the overhead console backing plate from the body taking care not to break the backing plate.
19. Remove the visor center support mounting clips.
20. Remove the coat hook mounting clips.
21. Remove the DVD mounting clips.