Wire Rope Guide Rollers - Installation

INSTALLATION





1. Install the roller bushings (2) onto the rollers (1).





2. Install the rollers (4) and install the axle rods (2).
3. Install the clips (3).





4. Install the roller bushings (1) onto the rollers (2).





5. Install the roller axle rods (3) and install the rollers (4) onto the support bracket (2).
6. Install the clips (1).





7. Store the winch hook on the most outboard loop of the tow hook.
8. Engage the clutch lever (2) and remove the slack from the wire rope.