Rear Channel - Quad Cab

REAR-QUAD CAB





1. Raise the window glass to the full up position and remove the window regulator Front Door Window Regulator - Removal.
2. Remove the lower bolt (1) that secures the rear glass run channel (3) to the door.
3. Loosen the upper bolt (4) that secures the rear glass run channel to the door.
4. Slide the rear glass run channel upward and disengage the upper screw from the door.
5. Remove the rear glass run channel from the door through the door panel opening (2).
6. If required, remove the weatherstrip from the rear glass run channel.