Cab Back Trim Panel - Installation

INSTALLATION





1. On Quad Cab models, position the rear cab trim panel (3) onto the rear cab back panel (2) and install the two push-pin fasteners (1 and 4).
2. On Quad Cab models, install the lower C-pillar trim panels C-Pillar Trim Panel - Installation.
3. On Quad Cab models, install the center seat belt trim bezel Seat Belt Retractor - Installation
4. On Quad Cab models, install the child seat tether straps Child Seat Anchor - Installation.





5. On Regular cab models, position the rear cab trim panel (1) onto the rear cab back panel (2) and install the utility hook (3) or the storage bin latch (4) (depending on application).
6. On Regular cab models, install the lower B-pillar trim panels B-Pillar Trim Panel - Installation.





7. If equipped, position the rear storage compartment (2) onto the rear cab trim panel (4) and install the three bolts (1). Tighten the bolts to 6 Nm (55 in. lbs.).