Right Rear Door Ajar Circuit Shorted To Ground

RIGHT REAR DOOR AJAR CIRCUIT SHORTED TO GROUND












1. RIGHT REAR DOOR AJAR SWITCH SHORT TO GROUND




1. With the scan tool in Inputs/Outputs, read the R R DOOR AJAR SW state.
2. While monitoring the scan tool, disconnect the Right Rear Door Latch connector.

Did the Switch State change from CLOSED to OPEN?

Yes

- Replace the Right Rear Door Ajar Switch.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Go To 2

2. (G76) RIGHT REAR DOOR AJAR SWITCH SENSE CIRCUIT SHORT TO GROUND




1. Disconnect the Instrument Cluster C3 harness connector.
2. Using a 12-volt test light connected to 12-volts, probe the (G76) Right Rear Door Ajar Switch Sense circuit and test for a short to ground.

Does the test light illuminate brightly?

Yes

- Repair the (G76) Right Rear Door Ajar Switch Sense circuit for a short to ground.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Replace the Instrument Cluster.
- Perform the BODY VERIFICATION TEST. Body Verification Test.