Seat Belt: Service and Repair

Front Outboard Seat Belt Left Side:

Front Outboard Seat Belt Right Side:

FRONT SEAT BELTS OUTBOARD SHOULDER HARNESS/LAP BELT REMOVAL
1. Remove shoulder harness turning loop.
2. Remove B-pillar or quarter trim panels as necessary to gain access to belt retractor.
3. Remove bolt holding retractor and lower lap belt anchor to B-pillar.
4. Separate belt from vehicle.

OUTBOARD SHOULDER HARNESS/LAP BELT INSTALLATION
Reverse the preceding operation.

Front Inboard Seat Belt Buckle:

INBOARD BUCKLE REMOVAL
1. Remove bolt holding seat belt buckle to seat riser.
2. separate buckle from seat riser.
3. Disconnect seat belt sensor wire connector, if equipped.

INBOARD BUCKLE INSTALLATION
Reverse the preceding operation.

Rear Shoulder/Lap Belts Left Side:

Rear Shoulder/Lap Belts Right Side:

REAR SEAT BELT OUTBOARD SHOULDER HARNESS/LAP BELT REMOVAL
1. Remove interior trim as necessary to gain access to belt retractor.
2. Remove bolt holding lower lap belt anchor to floor bracket.
3. Remove bolt holding belt retractor to inner quarter panel.
4. Separate belt from vehicle.

OUTBOARD SHOULDER HARNESS LAP BELT INSTALLATION
Reverse the preceding operation.