Removal

REMOVAL
1. Disarm air bag as outlined.

Service and Repair

2. Set front wheels in straight ahead position.
3. Remove air bag module as outlined under Driver Air Bag Module, Replace.

Driver Side Airbag Module Replacement

4. Remove speed control switch and electrical connector, if equipped, or cover.
5. Disconnect horn electrical connector.
6. Remove steering wheel attaching nut; then remove steering wheel using suitable puller.
7. Remove upper and lower steering column shrouds.
8. Disconnect clockspring two and four way electrical connectors.
9. Lift clockspring locating fingers, then gently pull clockspring assembly from steering column.