Rollover Valve: Service and Repair

WARNING: The fuel system is under constant pressure, even when the engine is OFF. Always release fuel pressure before servicing any fuel system component.

Fuel Tank Top View:

REMOVAL
1. Release fuel system pressure. Service and Repair
2. Remove fuel tank.
3. Slide the blade of a screwdriver between the rubber mounting grommet and the fuel pump module, making sure not to slide the screwdriver between the roll-over valve and grommet.
4. Remove the grommet from the valve, and make sure there is no damage or wear evident on the grommet. If grommet is worn it must be replaced.

INSTALLATION
1. Install the rubber grommet into the fuel tank, and seat it around the curled lip of the tank.
2. Lubricate the grommet with power steering fluid, and push rollover valve into grommet until properly seated. Twist grommet if necessary to align to correct position.
3. Install fuel tank.