Wheel Cylinder Installation

For additional information see Notes, Warinings, and Hints.

Brake Shoe Contact Pads On Backing (Support) Plate:

1. Apply RTV sealant around wheel cylinder mounting surface.

Fig 2 Removing Or Installing Wheel Cylinder:

Fig 1 Brake Tube Disconnected:

2. Slide wheel cylinder into position on support. Install mounting screws and tighten as specified.
3. Connect brake tube to wheel cylinder.
4. Insert parking brake cable into support plate and attach cable to parking brake lever.
5. Install brake shoes on support plate.
6. Install brake drum and wheel.
7. Adjust and bleed brakes.