Front Door Belt Molding and Weatherstrip

VAN ONLY

Belt Moulding And Weatherstrip:

1. Remove door glass.
2. Remove side view mirror.
3. Remove screws holding belt molding and weatherstrip to door panel.
4. Separate belt molding and weatherstrip from door.
5. Reverse the preceding operation for installation.


WAGON ONLY

Belt Moulding And Weatherstrip:

1. Remove door glass.
2. Remove side view mirror.
3. Remove door glass run weatherstrip.
4. Disengage clips holding door frame molding to door frame.
5. Remove screws holding belt molding and weatherstrip to door panel.
6. Separate belt molding and weatherstrip from door.
7. Reverse the preceding operation for installation.