| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| One CYL |
| Front Bank | 6.6 | 4.9 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 8.0 | 5.7 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Rear Bank | 6.6 | 4.6 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Each Additional | 1.0 | 0.7 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Note |
| With AC, Add | 0.4 | 0.2 | A | |
| With PS, Add | 0.4 | 0.2 | A | |
| To Replace Cylinder Head, Add |
| One Bank | 3.8 | 2.7 | A | |
| Both Banks | 5.3 | 3.8 | A | |
| To Grind Valves, Add | 2.9 | 2.1 | A | |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 1.1 | 0.0 | A | |
| Oil Pump, Renew | 1.9 | 0.0 | A | |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | |
| Rear Main Oil Seal, Renew | 1.6 | 0.0 | A | |
| Timing Chain, Renew | 1.8 | 0.0 | A | |
| Tune-Up | 0.7 | 0.0 | A | |