Removal

For additional information see Notes, Warnings, and Hints.

Fig. 2 Drum Brake Assembly:

1. Unhook adjusting lever return spring from the lever. Remove lever and return spring from lever pivot pin. Unhook adjuster lever from adjuster cable assembly.

Fig 6 Removing Or Installing Shoe To Shoe Spring (Rear):

Fig 7 Removing Or Installing Shoe Hold-down Springs (Rear):

2. Using brake spring pliers unhook upper shoe-to-shoe spring. Unhook and remove shoe holddown springs.
3. Disconnect parking brake cable from parking brake lever.

Fig 8 Removing Or Installing Shoe Assembly (Rear):

4. Remove shoes with lower shoe-to-shoe spring and star wheel as an assembly.