Wiper Switch: Service and Repair

Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the lower steering column cover panel screws.





3. Remove the upper and the lower steering column cover panels.





4. Remove the wiper switch by pushing in on the tabs on the top and the bottom of the switch housing.





5. Disconnect the electrical connections from the wiper switch.

Installation Procedure





1. Connect the electrical connections to the wiper switch.





2. Install the wiper switch by snapping it into the switch housing.





3. Install the lower steering column cover panel. Install the lower steering column cover panel screws.
Tighten
Tighten the lower steering column cover panel screws to 3 Nm (27 inch lbs.).





4. Install the upper steering column cover panel.
5. Connect the negative battery cable.