Tilt Wheel Handle: Service and Repair

TILT STEERING LEVER CAP

Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the lower steering column cover panel screws.





3. Remove the upper and the lower steering column cover panels.





4. Remove the tilt steering lever cap screw and the tilt steering lever cap.

Installation Procedure





1. Install the tilt steering lever cap and the tilt steering lever cap screw.
Tighten
Tighten the tilt steering lever cap screw to 3 Nm (27 inch lbs.).





2. Install the upper and the lower steering column cover panels.
3. Install the lower steering column cover panel screws.
Tighten
Tighten the lower steering column cover panel screws to 3 Nm (27 inch lbs.).
4. Connect the negative battery cable.