System Specifications
| Cylinder Head Bolts | 25 nm + 90 deg + 90 deg + 90 deg |
| Intake Manifold Retaining Nuts and Bolts | 18 nm |
| Camshaft Bearing Cap Bolts | 8 nm |
| Camshaft Pulley/Gear Bolts | 50 nm + 60 deg + 15 deg |
| Exhaust Manifold Retaining Nuts | 15 nm |
| Valve Stem Protrusion | 39.2 - 39.8 mm |
| Valve Guide Height | 13.7 - 14.0 mm |
| Overall Height | 134 +/- 0.025 mm |
| Minimum Overall Height After Machining | 133.9 mm |