Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: The fuel system is under pressure. To avoid fuel spillage and risk of personal injury or fire, it is necessary to relieve the fuel system pressure before disconnecting the fuel lines.




1. Relieve the fuel pressure. Refer to "Fuel Pump".
2. Disconnect the negative battery cable.
3. Remove the rear seat. Refer to Seats.
4. Remove the fuel pump access cover.




5. Disconnect the fuel tank pressure sensor electrical connector.
6. Bend the retaining tabs and remove the fuel tank pressure sensor.

INSTALLATION PROCEDURE




1. Install the fuel tank pressure sensor and bend the retaining tabs into place.
2. Connect the fuel tank pressure sensor electrical connector.




3. Install the fuel pump access cover.
4. Install the rear seat. Refer to Seats.
5. Install the fuel pump fuse and the gas cap.
6. Connect the negative battery cable.