Mast Antenna

Removal Procedure




1. Disconnect the negative battery cable.
2. Remove the luggage compartment rear quarter trim panel.
3. Unscrew and remove the mast antenna.
4. Remove the antenna cap nut and the rubber grommet.




5. Disconnect the antenna cable.
6. Remove the nut and the mast antenna base.

Installation Procedure

NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.




1. Install the mast antenna base with the nut

Tighten
Tighten the mast antenna base nut to 4 Nm (35 lb.in).




2. Connect the antenna cable.
3. Install the rubber grommet and the antenna cap nut.

Tighten
Tighten the antenna cap nut to 7 Nm (62 lb.in).

4. Install the mast antenna.
5. Install the luggage compartment rear quarter trim panel.
6. Connect the negative battery cable.