Front Door Glass - Installation

INSTALLATION





1. Install the glass (1) through the carrier plate cavity.
2. With the help of an assistant holding the glass, lift the glass into place and secure with tape.
3. Install the carrier plate,Front Door Carrier Plate - Installation.
4. Remove the tape or wedge from the window, lower the glass and engage the window regulator tabs into the glass.
5. Add or re-apply a clear adhesive patch covering the front window regulator access hole.
6. Close the latch access panel.
7. Reinstall the inner belt weatherstrip onto the front door.
8. Reinstall the trim panel onto the inside of the front door, Front Door Trim Panel - Installation.