Air Cleaner Body - Installation

INSTALLATION





1. Position the air cleaner housing (3) into the vehicle.
2. Install the air cleaner housing retaining bolt (2) and tighten to 4 Nm (35 in. lbs.).
3. Connect the fresh air makeup hose (1) onto the air cleaner housing.





4. Position the air inlet hose assembly (5), connect the air inlet hose to the throttle body and the air cleaner housing.
5. Secure the air inlet hose assembly retaining grommet onto the ball stud (4).
6. Tighten the clamp (3) at the air cleaner housing to 4 Nm (35 in. lbs.).
7. Tighten the clamp (2) at the throttle body to 4 Nm (35 in. lbs.).
8. Connect the electrical connector (1) to the Inlet Air Temperature (IAT) sensor.





9. Position the engine cover (1) and secure the retaining grommets to the ball studs.





10. Connect the negative battery cable and tighten nut (1) to 5 Nm (45 in. lbs.).