Fog Lamp Bulb - Removal

BULB

CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.





1. Disconnect and isolate the battery negative cable.
2. Raise and support the vehicle.
3. Loosen the front belly pan from the underbody far enough to access the back of the fog lamp on the back of the fascia fog lamp seat (3). Belly Pan - Removal.
4. Reach behind the front fascia to access and disconnect the headlamp and dash wire harness connector from the front fog lamp bulb connector receptacle (2).
5. Firmly grasp the bulb on the back of the front fog lamp housing (1) and rotate it counterclockwise about 30 degrees to unlock it.
6. Pull the bulb straight out from the keyed opening in the housing.