Entry/Exit Lamp Bulb - Removal

BULB





1. Disconnect and isolate the battery negative cable.
2. Remove the entry and exit lamp unit (1) (also known as the puddle lamp) from the bottom of the front or rear door trim panel. Entry/Exit Lamp - Removal
3. Gently press the movable bulb holder (4) and the bulb (3) towards the fixed bulb holder (2) far enough to disengage the wire loop terminal of the bulb from the hook of the fixed bulb holder.
4. Disengage the wire loop terminal of the bulb from the hook on the movable bulb holder.
5. Remove the bulb from the lamp.