Dual Fan

3.6L DUAL FAN

NOTE: If replacing the fan blades. The dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

1. Disconnect negative battery cable.
2. Remove the air filter housing assembly Air Cleaner Body - Removal





3. Disconnect the cooling fan electrical connector (1).
4. Remove the cooling fan mounting bolts (2).
5. Using care. Remove the radiator cooling fan assembly (3) from vehicle.





6. Removing the fan motor wiring harness (5) from the fan shroud (6).
7. Remove the fan blade (4) from the fan motor.
8. Remove the bolts (2) that support the fan motor to the shroud.