Trunk Welt - Installation

INSTALLATION





1. Install the wheel well cover trim as follows:
a. Position the wheel well cover and connect the trunk lamp (4) harness connector.
b. Install the cargo net lower hooks (5).
c. Install the push-in retainer (3) that secures the wheel well cover trim.
d. Install the cargo net hook screw (1) and upper cargo hook (2).
2. Reinstall the trunk rear trim panel into the luggage compartmentTrunk Rear Trim Panel - Installation.





3. Position the forward portion of the trunk side trim and install the push pin fasteners (3) to secure the trunk side trim.
4. Reposition the carpet tab (5), covering the rear seat back side bolster bracket retaining bolt (4).