Seat Back - Removal

REMOVAL





1. Remove the seat cushion. Seat Cushion Cover - Removal
2. Remove the nut and disconnect the seat belt anchor.

60/40 SEAT BACK - DOMESTIC SEDAN

40% SEAT BACK SIDE





1. Fold the 40% section of the seat (3) down.
2. Remove the two nuts (4) attaching seat back.
3. Pivot the seat back off the pivot pin (1) located on the 60% seat back (2).
4. Remove the seat back from vehicle.

60/40 SEAT BACK - DOMESTIC SEDAN

60% SEAT BACK SIDE





1. With the 40% seat back removed.
2. Fold the 60% section of the seat down.
3. Remove the four nuts attaching seat back (4).
4. Remove the seat back for vehicle.

60/40 SEAT BACK - EXPORT SEDAN

40% SEAT BACK SIDE





1. Fold the 40% section of the seat (3) down.
2. Remove the three nuts (4) attaching seat back.
3. Remove the seat back from vehicle.






60/40 SEAT BACK - EXPORT SEDAN

60% SEAT BACK SIDE

1. With the 40% seat back removed.
2. Remove the four nuts (1) and (3) attaching seat back.
3. Remove the seat back from vehicle.

NON-FOLDING SEAT BACK

1. Remove the lower seat back mounting fasteners.
2. Disengage the upper seat back snap fasteners by using a flat blade tool inserted at the top of the seat and pushing down on spring fasteners to disengage.
3. Remove the seat back from the vehicle.