Instrument Panel Cover - Removal

REMOVAL





1. With the help of an assistant, remove the instrument panel and place on bench, Instrument Panel - Removal.





2. With the help of an assistant, turn the I/P upright.
3. Remove the two screws (1) that secure the telematics gateway assembly reinforcement to the I/P cover.





4. Remove the passenger side airbag, Passenger Air Bag - Removal.
5. Remove the defroster duct, Defroster Duct - Removal.
6. Remove the speakers (1) from the I/P, Speaker - Removal
7. Remove the sun sensor (2) from the I/P, Sun Sensor - Removal.





8. Remove the two I/P cover to structure side screws (1). Repeat for the opposite side.





9. Remove the screws (1) that attach the I/P cover to structure in the instrument cluster area.
10. Remove the screws (2) that attach the I/P cover to structure in the steering column area.





11. Remove the screw (1) that attaches the I/P cover to the structure in the lower center stack area, on the driver side.





12. Remove the two screws (1) from the module.
13. Remove the two I/P to structure bolts (2).





14. Remove the seven screws (1) attaching the I/P cover to the structure in the glove box area.





15. Disconnect and remove the WIN module.
16. Remove the I/P cover (1) from the structure.