Rear Carpet - Removal

REAR





1. Remove the driver and passenger front seats from the vehicle. Front Seat - Removal.
2. Remove the center console from the front floor panel transmission tunnel. Floor Console - Removal.
3. Remove the trim from the inside of both lower B-pillars. B-Pillar Trim Panel - Removal.
4. Remove the rear seat cushion from the vehicle. Seat Cushion Cover - Removal.
5. Remove the scuff plate from both rear door sills. Scuff Plate - Removal.
6. Remove the push-pin fasteners (2) that secure the outboard edges of the rear carpet (3) near the front of each rear door opening (1) sill.
7. Lift the rear carpet from the floor panel far enough to extract the body wire harness take outs and connectors through the appropriate slits in the carpeting.
8. Remove the rear carpet from the vehicle through one of the rear door openings.