Intake And Exhaust Valves - Removal

REMOVAL





1. Remove the cylinder head(s)Cylinder Head - Removal.

NOTE: If the springs are to be reused, identify their positions so that they can be reassembled into their original locations. Number 5 cylinder exhaust valve spring shown, all other valve springs similar.

2. Remove the valve spring(s) (2) Valve Springs - Removal.






CAUTION: Before removing the valves, remove any burrs from the valve stem retainer lock grooves (2) and stem tip (1) to prevent damage to the valve guides.

3. Remove the valve(s) (3). Identify each valve to ensure installation in the original location.





4. If required, remove the valve guide seal (1) and spring seat (3) Valve Guide Seals - Removal.