Horn Switch - Removal

REMOVAL

WARNING: On vehicles equipped with airbags, refer to electrical, restraints before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible serious or fatal injury.

HORN SWITCH ASSEMBLY - LHD





1. Remove the driver side airbag assembly (1). Driver Air Bag - Removal.
2. Disconnect the air bag assembly electrical connectors.

NOTE: The horn switch pads are only serviced as an assembly with the airbag mounting bracket.

3. Remove the four e-clip retainers (3) that secure the airbag mounting bracket (2) to the airbag.