Fog Lamp - Installation

LAMP





1. From the back of the front fascia, position the front fog lamp and mounting ring (1) onto the back of the fog lamp bezel (2).
2. Align the four slots in the front fog lamp mounting ring with the four latch features (4) integral to the back of the fog lamp bezel.
3. Press firmly and evenly on the fog lamp mounting ring until the four latch features snap into place through the mounting ring slots.
4. Reconnect the engine compartment wire harness connector to the front fog lamp bulb connector receptacle (3).
5. Reinstall the front lower fascia closeout panel. Front Lower Fascia Closeout - Installation.
6. Lower the vehicle.
7. Reconnect the battery negative cable.
8. Confirm proper front fog lamp alignment. Adjustments.