Ambient Temperature Sensor - Installation

INSTALLATION





1. Reach up between the lower edge of the front fascia and the front of the a/c condenser near the right end of the lower air intake opening to position the ambient temperature sensor (3) just below the front bumper (1).
2. Align the sensor with the wire harness connector (2) for the sensor.
3. Push the sensor straight into the connector until the connector latch engages with an audible click, then engage the Connector Position Assurance (CPA) lock on the connector.
4. Reinstall the front fascia lower close out panel onto the vehicle. Front Lower Fascia Closeout - Installation.
5. Lower the vehicle.
6. Reconnect the battery negative cable.