Shifter Housing - Installation

INSTALLATION






NOTE: Avenger shown, 200 similar.

1. Connect the floor console wire harnesses.
2. Align and position the console (1).
3. Once properly positioned, release the emergency brake.





4. Install the bolts (1) into the console bin. Tighten the bolts securely.
5. Install the console bin liner.





6. Install the shifter trim bezel (1).





7. Install the front console fasteners. Tighten the fasteners securely.
8. Connect and install the console front storage bin.





9. Connect and install the HVAC controls (1).
10. Connect the negative battery cable.