Instrument Panel Glove Box - Installation

INSTALLATION





1. Connect and position the glove box module (1).
2. Install the glove box module fasteners (2, 3, 4, 5). Tighten the fasteners securely.





3. Position the hush panel/silencer (1) and install the push pin fasteners (2).





4. Position the glove box (1).
5. Connect the glove box dampener to the glove box.
6. Place glove box in position and firmly snap glove box assembly onto instrument panel hinge pivots.
7. Push in sides of glove box bin and snap glove box assembly into instrument panel.
8. Close into glove box door (1).
9. Install the instrument panel end cap.
10. Install the cowl trim panel, Cowl Trim Panel - Installation.
11. Connect the negative battery cable.