Instrument Cluster Bezel - Installation

INSTALLATION





1. On Avenger models, Align and position the instrument cluster hood bezel (1) to the I/P. Hand tap to engage the retaining clips.






NOTE: The gap hider on the upper shroud is attached to the instrument cluster (1) by four retaining tabs along the top and two along the sides (one each side). These tabs can be easily released by hand but is recommended to remove/install as an assembly. Do not use a tool that could damage the gap hider.

2. Install the instrument cluster trim ring/upper column shroud (1).
3. Install the lower steering column shroud, Steering Column Shroud - Installation.