Shaft Lock Module - Installation

INSTALLATION





1. Connect the shaft lock connector to the module.
2. Align the engagement and slide tabs (2) on the shaft lock module housing (1) with the slots and channels in the mounting bracket (3) on the steering column.
3. Carefully slide the module toward the top (steering wheel end) of the column until it is in mounted position and the spring clips on the shaft lock module have engaged the bracket, locking it in place.





4. Install the steering column cover reinforcement (1) using the four mounting screws (2).
5. Install the steering column opening cover Steering Column Opening Cover - Installation.

NOTE: If a NEW column lock module has been installed, a new Wireless Ignition Node (WIN) must also be installed.

NOTE: For module and programming replacement order Module/Programming Order Replacement Guide