Instrument Cluster - Removal

REMOVAL

SEBRING

1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster bezel Instrument Cluster Bezel - Removal.
3. Remove the four retaining screws (1) to the instrument cluster, (only two upper screws on Dodge).

4. Pull instrument cluster rearward to expose the four electrical connectors.
5. Disconnect the electrical connectors and remove cluster from instrument panel.
6. Separate cluster bezel from cluster by removing the four retaining screws (1).

AVENGER

1. Disconnect and isolate the battery negative cable.
2. Remove drivers surround bezel Instrument Panel Bezel - Removal.
3. Remove the upper retaining screws (1) to the instrument cluster.

NOTE: Dodge Avenger models are only equipped with two upper retaining screws.