Starter - Removal

2.7L





1. Disconnect and isolate negative battery cable.
2. Remove the front mount through bolt (1).





3. Remove lower engine anti-roll mount bolt (2)
4. Remove crossmember mounting bolts (1).





5. Remove crossmember mounting bolts (1).
6. Remove crossmember from vehicle.





7. Remove torque reaction bracket transmission to starter bolt (1).
8. Remove negative battery cable (2).
9. Remove torque reaction bracket to transmission bolt (4).
10. Remove torque reaction bracket to engine bolt (5).
11. Remove torque reaction bracket (3) from vehicle.





12. Remove battery cable nut (1), ignition sense wire (2) and battery cable (3) from solenoid stud.
13. Disconnect electrical connector (4) from starter solenoid.





14. Remove starter mounting bolts (1) from transmission housing (2).
15. Remove starter motor (4) and dust shield (3) from transmission housing (2).
16. Remove starter motor (4) from vehicle.