Fuel Rail - Installation

2.7L





1. Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
2. Install retaining clips on fuel injectors.
3. Push injectors into fuel injector rail until clips are in the correct position.





4. Position fuel rail over cylinder heads, and push rail into place. Tighten fuel rail mounting bolts to 11.9 Nm (105 in. lbs.).
5. Connect the fuel supply tube quick connect fitting to the fuel rail. Refer to Quick Connect Fittings Service and Repair.
6. Connect the electrical connectors to the fuel injectors.
7. Install intake manifold, Intake Manifold - Installation.
8. Connect negative cable to battery.