Upper Tube

2.7L - UPPER TUBE






WARNING: The normal operating temperature of the exhaust gas recirculate (EGR) valve and tube is very high. Therefore, never work around or attempt to service any engine component until it is completely cooled.

1. Disconnect negative battery cable.
2. Remove upper bolts (1) from intake manifold. Inspect gasket, replace if necessary.
3. Remove bolts (5) attaching upper tube (2) to EGR valve (3).
4. Remove the gasket (4) between upper tube (2) and EGR valve (3).

CAUTION: Clean mounting surface of EGR valve. Do not use sharp metal scraping tools. Damage may occur to the sealing surfaces of the EGR valve causing a leak.

5. Clean mounting surface of EGR valve.