Drain Tubes - Removal

REMOVAL

DRAIN TUBE-FRONT





1. Place the convertible top in the vertical position.
2. Remove the center rail trim panel by removing the lower pushpins and carefully pulling the trim away from the convertible top center rail (3).
3. Disconnect the drain tube (1) from the front of the middle panel weatherstrip (2).





4. Disconnect the drain tube (1) from the Y-fitting (4) near the primary hinge.
5. Carefully pull the drain tube away from the center rail, releasing the securing tape and pull the drain tube through the center rail from the Y-fitting.

DRAIN TUBE - REAR





1. Place the convertible top in the vertical position.
2. Remove the center rail trim panel by removing the lower pushpins and carefully pulling the trim away from the convertible top center rail (3).
3. Disconnect the drain tube (2) from the Y-fitting (4) near the primary hinge.





4. Disconnect the drain tube (3) from the rear of the middle panel weatherstrip (1).
5. Carefully remove the drain tube from the vehicle.

DRAIN TUBE - BODY





1. Place the convertible top in the vertical position.
2. Remove the center rail trim panel by removing the lower pushpins and carefully pulling the trim away from the convertible top center rail.
3. Disconnect the drain tube (3) from the Y-fitting (4).
4. Disconnect the drain tube from the vehicle and remove.