Retractable Hard Top - Mid/Rear Panel

MID/REAR PANEL





1. Place top in vertical position.
2. Engage J-Clip to the headliner deck bar.





3. Position the mid/rear headliner on the center panel and firmly snap into place.





4. Install the left and right center rail trim (1).
5. Install the push pins (2) on the left and right center rail trim (1).





6. Insert strap (2) through the loop bracket (1).





7. Install the pushpins(1) securing the headliner to the closeout panel.
8. Lower top and check for clearance with the front headliner.