Trunk Trim Panel - Installation

INSTALLATION

PANEL-REAR TRUNK TRIM





1. Maneuver the trim panel over the decklid latch.
2. Gently push the top of the panel to engage the clips to the body
3. Gently seat the lower part of the trunk trim panel to engage the clips to the body.
4. Install the spare tire cover.
5. Close the trunk.

PANEL-SIDE TRUNK TRIM





1. Place the side trim in position to the vehicle.
2. Right side only, connect the electrical connectors.
3. Push in at the bottom of the trim panel and slide the tab under the cargo shield bracket.
4. Engage the spring clip retainer (2) into the MOAB bracket.
5. Install the pushpin (1) to the side shield.
6. Tighten the cargo shield bracket nuts (3).
7. Install the trunk weather-strip.
8. Install the trunk rear trim.1.
9. Close the trunk.